Square Racks are designed to hold Excel Modular Scaffold verticals, diagonals and

other irregular shaped components.

Square racks will hold 125 - 20 cup verticals or an equivalent number of smaller verticals

pinned together.

When shipping the square racks require 2

pieces of banding to be placed around the

base of the rack and the item being carried.

Racks  are  designed  to  hold  a  maximum  of

5000 lbs of material.

Square racks may be stacked for storage.

The strength of the storage surface will

determine how many racks can be stacked.

On grass, dirt or other unpacked surfaces, racks

should be placed singly. On prepared surfaces

racks  can  be  placed  two  or  three  high.  On

asphalt  and  3  or  more  inches  of  concrete,

racks may be stacked three or four units high.

Racks should not be stacked more than 4 units

high.

Always inspect the surface of the area where racks are stored for any cracking, or sinking

and inspect the racks for tilting or leaning. Correct any problems immediately.

Square racks are designed so special Casters may be placed on the bottom to allow the

racks to be easily moved without a forklift.