|
Excel Trusses are designed to be used as lifting rigs. This allows simple Excel Scaffold designs to be used with a chain fall for removing valves, covers and other heavy equipment from congested areas. |
|
*Note: For Design A & B The nylon strapping must be placed to prevent sideways twisting of truss. For Design C: 1) the I-Beam must be a minimum of 4 in. at the base. 2) the listed loads are for the load attached to the center of the I-Beam. 3) the I-Beam may be the limiting load carrying member. |
|
Part Number |
Description |
Maximum Allowable Load Design A & B |
Maximum Allowable Load Design C |
|
TR5 |
5 ft Truss |
3000 |
6,000 |
|
TR6 |
6 ft Truss |
3000 |
5,500 |
|
TR7 |
7 ft Truss |
3000 |
6,000 |
|
TR8 |
8 ft Truss |
3500 |
7,000 |
|
TR9 |
9 ft Truss |
3500 |
7,000 |
|
TR10 |
10 ft Truss |
3500 |
7,000 |
|
TR12 |
12 ft Truss |
3500 |
7,000 |
|
TR14 |
14 ft Truss |
3000 |
6,000 |
|
TR16 |
16 ft Truss |
2000 |
4,000 |
|
TR18 |
18 ft Truss |
2000 |
4,000 |